產品推薦
聯系方式
- 電話:400-1016-218
- 郵箱:355185756@qq.com
- 地址:安徽省合肥市高新區黃山路602號合肥國家大學科技園A401室
產品詳情
ATCC 28368 編號
An ampoule containing viable cells (may include spores and mycelia) suspended in cryoprotectant.
Product category Fungi
Strain designation 別名 Ax-3
Type strain 模式菌株 No
Product format 提供形式 Freeze-dried
Storage conditions 保藏溫度 2°C to 8°C
Specific applications produces calmodulin transformation host hydrolysis of a phosphonate ester
Preceptrol No
Comments Actin binding to plasma membrane Thymidine kinase activity Part of the Eumycetozoan Project This strain may grow in axenic medium or with Klebsiella aerogens, but ATCC maintains this strain with a bacterial food source.
Medium 培養基 ATCC Medium 617: Bg-11 for marine blue-green algae
ATCC Medium 1034: Modified PYNFH medium (Available from ATCC as ATCC cat. no. 327-X)
Temperature 培養溫度 20-25°C
Atmosphere 需氧情況 Aerobic
Handling procedure For freeze-dry (lyophilized) ampoules: Open an ampoule according to enclosed instructions.
From a single test tube of sterile distilled water (5 to 6 mL), withdraw approximately 0.5 to 1.0 mL with a sterile pipette and apply directly to the pellet. Stir to form a suspension.
Aseptically transfer the suspension back into the test tube of sterile distilled water. Let the test tube sit at room temperature (25°C) undisturbed for at least 2 hours; longer (e.g., overnight) rehydration might increase viability of some fungi. Mix the suspension well. Use 1.0 mL to inoculate recommended freshly-made and wetted solid medium and freshly-made liquid medium.
Agar plates should be overlaid with 2 mL of a liquid medium, either #671 or #1034 (with 10% fetal bovine serum included).
Include a control that receives no inoculum. Incubate the inoculum at the propagation conditions recommended. Inspect for growth of the inoculum/strain regularly.
The sign of viability is noticeable typically after 2-3 days of incubation.
However, the time necessary for significant growth will vary. Subculture from stationary liquid cultures after one week.
Sequenced data No DNA sequencing was performed in house on this product.
Deposited as Dictyostelium discoideum Raper Depositors WF Loomis
Chain of custody ATCC <-- WF Loomis
Special collection Eumycetozoan Project
Cross references 參考文獻 GenBank D12883 gene coding for gp138 GenBank D12884 gene coding for gp138
常見問題
答:公司提供兩種運輸方式供老師選擇,1、復蘇的活細胞:采用常溫發貨的方式,收到即可觀察密度并判斷是否進行傳代操作。優勢是省去復蘇的步驟,細胞成活率較高。2、凍存的細胞:采用干冰運輸,一般情況下發貨是2支凍存管,收到后放-80過夜,第二天轉入液氮長期存儲,擇機復蘇。優勢是發貨快,一般一兩天即可收到,缺點是需要自己復蘇。
答:我公司提供的細胞大部分都參考資源庫的培養信息,如ATCC、DSMZ、中科院等等官方平臺。也有少部分細胞為客戶提供了替代培養方案,根據客戶的意愿進行選擇!
答:不可以重復使用,一般從我公司發出的細胞都需要達到一定的密度后發出,充液的培養基血清比例會比正常培養時所用到的培養液低很多,通常在3-5%,以維持細胞存活,控制生長速度,不可以用來做細胞培養使用。
答:細胞在鏡下發現圓形的白色的點點,一般情況下是為貼壁的細胞或脫落的細胞死亡后的產物,懸浮細胞也會有這種現象,出現圓形的光圈一樣的圓點。通常,白色的圓點是分散分布的,聚團類的懸浮細胞可能會聚團出現白色的亮斑,技術老師可以繼續培養并觀察。
答:一般情況下,我公司建議客戶收到細胞后傳1-2代后即可安排凍存留種,可先凍存1-2支凍存管,凍存的細胞數量多一些,便于后期復蘇。購買原代細胞的客戶,要充分考慮該細胞的傳代次數限制,人源原代細胞大概可以傳7代左右,鼠源的可以傳3代左右,對于一些能傳代次數很少的原代細胞,不建議凍存,收到后調整狀態后即可安排實驗。



一鍵復制產品信息










皖公網安備 34010402703761號
楊經理:2028438226






