Acanthamoeba Sp.
目錄價
¥ 0
一鍵復制產品信息
別稱Acanthamoeba Sp.
貨號Delf-17231
規格
產品推薦
聯系方式
- 電話:400-1016-218
- 郵箱:355185756@qq.com
- 地址:安徽省合肥市高新區黃山路602號合肥國家大學科技園A401室
產品詳情
Organism: Acanthamoeba sp. 4
Designations: 66-1A-MX
Isolation: Apalachicola River, Florida, 1981
Depositors: TK Sawyer
Biosafety Level:2
Shipped: frozen
Growth Conditions: ATCCmedium 711: PYBATCCmedium 997: Fresh water ameba mediumTemperature: 25.0°C Protocol: ATCCNO: 50655 SPEC: The strain is distributed as a frozen stabilate. See general instructions for thawing and storage of frozen material before proceeding. Remove the frozen ampule from the dry ice and transfer directly to a 35C water bath. After thawing the ampule, transfer the contents to the surface of an ATCCmedium 997 or 711 agar plate (20 x 100 mm). Spread the material evenly over the surface of the plate with a sterile spread bar. The food bacterium, Enterobacter aerogenes ATCC13048, is present in the thawed material. Wrap the plate with time tape or parafilm and incubate upright at 25C. Many trophozoites should be visible within 2-3 days. Transfer the culture every 28 days as follows: Aseptically remove a small block of agar (approximately 5 mm square) containing cysts and, at the edge of an ATCCmedium 997 or 711 agar plate containing a lawn of Enterobacter aerogenes ATCC13048, invert the block onto the surface. Wrap the new plate and incubate as above. The trophozoites will migrate away from the agar block to the opposite edge of the plate. Continue to subculture as above.
Permits/Forms: In addition to the MTA mentioned above, other ATCC and/or regulatory permits may be required for the transfer of this ATCC material. Anyone purchasing ATCC material is ultimately responsible for obtaining the permits. Please click here for information regarding the specific requirements for shipment to your location.
Comments: phylogeny [24028]
Classification: KINGDOM: Protozoa
References: 24028: Daggett PM, et al. A molecular approach to the phylogeny of Acanthamoeba. Biosystems 18: 399-405, 1985. PubMed: 4084681
常見問題
答:公司提供兩種運輸方式供老師選擇,1、復蘇的活細胞:采用常溫發貨的方式,收到即可觀察密度并判斷是否進行傳代操作。優勢是省去復蘇的步驟,細胞成活率較高。2、凍存的細胞:采用干冰運輸,一般情況下發貨是2支凍存管,收到后放-80過夜,第二天轉入液氮長期存儲,擇機復蘇。優勢是發貨快,一般一兩天即可收到,缺點是需要自己復蘇。
答:我公司提供的細胞大部分都參考資源庫的培養信息,如ATCC、DSMZ、中科院等等官方平臺。也有少部分細胞為客戶提供了替代培養方案,根據客戶的意愿進行選擇!
答:不可以重復使用,一般從我公司發出的細胞都需要達到一定的密度后發出,充液的培養基血清比例會比正常培養時所用到的培養液低很多,通常在3-5%,以維持細胞存活,控制生長速度,不可以用來做細胞培養使用。
答:細胞在鏡下發現圓形的白色的點點,一般情況下是為貼壁的細胞或脫落的細胞死亡后的產物,懸浮細胞也會有這種現象,出現圓形的光圈一樣的圓點。通常,白色的圓點是分散分布的,聚團類的懸浮細胞可能會聚團出現白色的亮斑,技術老師可以繼續培養并觀察。
答:一般情況下,我公司建議客戶收到細胞后傳1-2代后即可安排凍存留種,可先凍存1-2支凍存管,凍存的細胞數量多一些,便于后期復蘇。購買原代細胞的客戶,要充分考慮該細胞的傳代次數限制,人源原代細胞大概可以傳7代左右,鼠源的可以傳3代左右,對于一些能傳代次數很少的原代細胞,不建議凍存,收到后調整狀態后即可安排實驗。














皖公網安備 34010402703761號
夏經理:341412994






